BANDING KITS FOR ORCHARDS

AND VINEYARDS



1200C w/225 Manual Banding Kit

225 MANUAL BANDING KIT

This unit had 2 control cables that operate independently with 2 separate levers. This allows the operator to spread material to both sides at the same time or to one side or the other. This is accomplished by control levers mounted beside the operator. (Picture shown below)

225 HYDRAULIC CONTROLLED BANDING KIT

This one takes the work out of opening and closing...lets the cylinder do the work. Individual cables to each opening...disconnect one for one-sided spreading. Precision openings fine for spreading granular chemicals as insecticides and herbicides.

Also available for 225 Banding Kit when mounted on 1200C, the 525 Dual Hydraulic Cylinders for INSTANT-ON...INSTANT-OFF control for right or left spreading. Both style Banding Kits area ideal for spreading fertilizer under fruit and nut trees, in vineyards, nurseries and any place where band spreading is desired. The chutes are adjustable from 60 inches to 34 feet, with no center spread where not needed. (On side spreads such as 34 ft., pattern width is approximately 6 ft., and on 60 inches, pattern width is approximately 18 inches.)


OPTIONAL EQUIPMENT

  • 1200C w/Orchard Trailer, #269 w/low profile wheels and flotation tires
  • #82 - Side Pattern Kit (Manual Controlled)
  • #838 - Hydraulic controlled side-pattern kit (Must have 1000 kit installed)
  • #180 - Manual Controlled Banding Kit
  • #275 - Rear Discharge only banding kit (Gearbox must be set at 1000 RPM but run at 540 RPM)
  • #276 - Left Side only Banding Kit
  • #232 - Mounting Kit to complete mounting of 225 hydraulic controlled banding kit when user does not want to purchase complete 1000 hydraulic kit
  • #1000 - Hydraulic Kit for remote control of seeder (requires 8” stroke ASAE hydraulic cylinder) with 28-3/8 extended length. (Cylinder not included)

Dual controls for 225 Manual Banding Kit



1200C with #276 Left Side Only Banding Kit