Home
About Herd
Products
Contact Us
FAQs
You are here:
Herd_Seeder_Products
:
i92_seeder_parts
Shopping cart is empty.
To order, please choose your part below:
1 - I-92-600 Old Style 12 volt DC Motor - three and one fourth inch in diameter and five sixteenth inch shaft
1 - I-92-712 12 Volt DC motor - New Style four inches in diameter
2 - I-92-981C Hopper I-92 seeder - two and seven eighths bushel capacity - includes all decals
2 - I-92-982 Hopper extension for hopper of I-92 - for light seed only
3 - I-92-796 Lid for Hopper of I-92 seeder
4 - I-92-599 Grey iron base
5 - I-92-913 Lid spring with bolt, flat washer and nut
6 - I-92-924 Brace rod clamps
7 - I-92-934 Brace rod - five sixteenths inch hole in end
8 - I-92-936 Brace rod - five eighths hole in end
10 - I-92-986 Fan with five sixteenths inch bore - 502 socket set screws included
11 - I-92-767 Straight angle with plates welded on ends
12 - I-92-768 Right L arm for front or rear mounting
13 - I-92-769 Left Larm for front or rear mounting
15 - I-92-831 Herd Sure-Feed Broadcaster decal
15 - I-92-756 Pulley for remote control
16 - I-92-757 Spring stainless steel - used under agitator to hold washer
17 - I-92-558 Steel washer - used on fan shaft under 757 spring
19 - I-92-504 Seed gate with connecting linkage - stainless steel
20 - I-92-509 Guide assemblies for seed gate - 1 set consists of 2 - stainless steel
21 - I-92-516 Hex Head Cap Screw - one quarter inch X one half inch with washer, stainless steel
22 - I-92-792 Control handle
23 - I-92-510 Three sixteenths inch X three eighths inch round head machine screw, stainless steel
24 - I-92-802SI St steel pivot plate with gauge markings
25 - I-92-803S Opening Gauge, stainless steel used on 802SI pivot plate
27 - I-92-806A Machine screw-three sixteenths inch X one and three quarter inch with nut and washer
28 - I-92-807 Compression Spring used on handle
29 - I-92-505 Pan Head Bolt, stainless steel - one quarter inch X one half inch with locking nut
31 - I-92-886 Socket setscrew
31 - I-92-754 Electric wire 14 gauge 12 ft
32 - I-92-755 Heavy duty clamp
33 - I-92-794 Switch, Push-Pull, to turn motor on and off - 12 volt
34 - I-92-520 Wire assembly with fuse for use with rheostat
34 - I-92-813 Rheostat complete with bracket and knob
34 - I-92-818 Rheostat only-with nut and no bracket
34 - I-92-819 Knob only, for rheostat
34 - I-92-820 Bracket only for rheostat
35 - I-92-598 Collar only
36 - I-92-773 Perforated screen guard
37 - I-92-517 Blocking plate-used in 808 and 808A kit -OPTIONAL
40A - I-92-808 Complete width control kit for spreading insecticides, herbicides, etc
41 - I-92-808A Complete width control kit
41 - I-92-408A Round head machine screw-three sixteenths inch X three fourths inch with nut
41 - I-92-559 Heavy Duty Agitator with five sixteenths inch bore
41 - I-92-758 One eighths inch X two inch spring pin with five sixteenths inch bore
42 - I-92-410 Machine bolt-one half inch X one inch with nut and lock washer
43 - I-92-410A Hex Head Cap Screw - one half inch X one inch with lock washer
44 - I-92-407 Machine bolt - five sixteenths inch X one inch with nut and lock washer
45 - I-92-422 Machine bolt - five sixteenths inch X one and three quarter inch with nut
48 - I-92-817 Perforated screen guard
48 - I-92-981C Hopper for I92
49 - I-92-796 Lid for hopper 981
50 - I-92-989B Seeding chart decal for hopper
51 - I-92-1091 Warning decal
I-92
