Home
About Herd
Products
Contact Us
FAQs
You are here:
Herd_Seeder_Products
:
gt77_reg_seeder_parts
Shopping cart is empty.
To order, please choose your part below:
1 - GT-77-500 Grey-iron base for GT 77 casting
2 - GT-77-511 Stand
3- 4 - GT-77-410A one half inch X one inch Hexhead capscrew with lock washer
5- 6- 7 - GT-77-514 one half inch x one and three quarters inch Hexhead capscrew
8 - GT-77-911 Hopper
9- 11 - GT-77-912 Lid and cotter key
10- 12- 13 - GT-77-913 Lid spring and bolt with nut
14 - GT-77-778 12 volt motor
15 - GT-77-501 Fan, 4 bladed, plastic, five sixteenths inch shaft hole, with st st setscrews
16 - GT-77-502 one quarter inch x five sixteenths inch socket screw, ss for fan
17 - GT-77-779 Whiz nut , used on motor
19 - GT-77-1091 Warning decal
20 - GT-77-812 Complete wiring assembly 20 amp fuse
23- 24- 25- 26- 27- 28 -29- 30 - GT-77-813 Rheostat complete with bracket for 12 volt
23 and 28 - GT-77-818 Rheostat and nut
29 - GT-77-820 Bracket for rheostat
30 - GT-77-107 Bracket bolt , one quarter inch x one half inch with washer
31 - GT-77-512 Brace rod , five sixteenths inch hole in end
32 33 34 - GT-77-407 Hex head capscrew , five sixteenths inch x one inch , with washer and nut
35 36 37 - GT-77-924 Brace rod clamp, complete
27 - GT-77-819 Knob for rheostat
67 - GT-77-831 Herd Sure Feed Broadcaster decal
42 - GT-77-781 Round head machine screw, left-hand thread , used to bolt bronze bushing to fan
43 - GT-77-507 Round head machine screw, st st , three sixteenths inch x three eights inch with washer
44 -45 - GT-77-503 Bronze agitator bushing , used on fan and pivot plate
46 - GT-77-209 Agitator, stainless steel
47 - GT-77-508L Nipple , used on agitator
48 - GT-77-517M Blocking plate, optional
49 - GT-77-802S Pivot plate, stainless steel
50 - GT-77-510 Round head machine screw, st st , three sixteenths inch x three eights inch
51 - GT-77-509 Guide assemblies for seed gate, (1 set consists of 2) st st
52 - GT-77-504 Opening plate with connecting linkage, stst
53 - GT-77-803S Opening gauge control plate , works with pivot plate 802S, stainless steel
54- 55- 56- 57 - GT-77-515 Whiz lock bolt, stst , one quarter inch x one half inch with wing nut and washers
58 59 - GT-77-516 Hex head capscrew, st st , one quarter inch x one half inch , with washer
60- 61 - GT-77-505 Pan head bolt, st st , one quarter inch x one half inch with locking nut
62 - GT-77-792 Control handle
63- 64- 65 - GT-77-806 Machine screw , three sixteenths inch x one and three quarters inch , with nut and washer
66 - GT-77-807 Compression spring , used on handle bolt
68 - GT-77-210 Model number decal Model GT77
GT-77-REG GT-77 Reg
