Home
About Herd
Products
Contact Us
FAQs
You are here:
Herd_Seeder_Products
:
f160_std_seeder_parts
Shopping cart is empty.
To order, please choose your part below:
2 - F-160-915 Grease fittings, one quarter inch straight
3 - F-160-924 Brace rod clamps
4 - F-160-925 Seed gate slides or guides, (2 used per side)
5 - F-160-926 Seed gate with connecting link
6 - F-160-927 Seed opening gauge , complete
6A - F-160-927B one quarter inch x two and one half inch, Thumbscrew with nut for seed gauge
7 - F-160-930 Tension spring with bolt, used on control arm
8 - F-160-934 Brace rods , five sixteenths inch hole in end
9 - F-160-936 Brace rods, five eighths inch hole in end
10 - F-160-938 V belt, thirty six inches long
11- F-160-939 Brackets for hopper braces
12 - F-160-946 Seed opening plate on which seed gate operates
13 - F-160-947 2 step pulley with one and five eighths inch bore
14 - F-160-948 Drive assembly for one and three eighths inch PTO, one and five eighths inch OD
15 - F-160-949 Pulley, single groove, five eighths inch bore
16 - F-160-952 Idler Pulley , five eighths inch bore
17 - F-160-953 Casting with bearings and fan shaft
18 - F-160-954 Bearings, for casting and idler pulley, five eighths inch x one inch
19 - F-160-955 Control handle
20 - F-160-956 Fan, 6 bladed with five eighths inch bore
21 - F-160-991 Fan shaft with agitator pin ,five eighths inch, to be used with sealed bearing 992
22 - F-160-958 Gears, five eighths inch bore, (sold only in pairs)
23 - F-160-959 Collar, five eighths inch bore
24 - F-160-960 Driven shaft, five eighths inch x twelve inches
25 - F-160-961 Hopper for Model F160
26 - F-160-963 Brace bar , back of hopper , right side with clip welded on it
27 - F-160-969 Inside channel of adjustable stand, with 6 holes, (bottom section)
28 - F-160-970 Outside channel of adjustable stand, with 6 holes, (top section)
29 - F-160-971 Idler assembly for adjustable stand only
30 - F-160-972 Spring for idler assembly 971
31 - F-160-977 Brace bar with upper control handle attached , left side
32 - F-160-992 Sealed bearing complete, does not include 991 fan shaft
33 - F-160-973 Pulley, three and three fourths inch, five eighths inch bore used when broadcasting fertilizer and other material other than seeds
34 - F-160-994 Steel washers or spacers, five eighths inch bore, to be used behind gears
35 - F-160-410A Machine bolts, one half inch x one inch with lockwasher
36 - F-160-411 Sq Hd setscrews , one half inch x three inch,used on idler assembly
37 - F-160-401 Sq Hd setscrews , three eighths inch x three quarters inch
38 - F-160-887 Socket SS, five sixteenths inch x five sixteenths inch, used in pulleys and gears
39 - F-160-412A Hex hd capscrews, five sixteenths inch x one half inch, with flat washers
40 - F-160-404 Rd Hd machine screws , three sixteenths inch x three sixteenths inch
41 - F-160-999 Half moon keys for keyways
42 - F-160-405 Rd Hd machine screws, one quarter inch x one half inch with nuts and washers
43 - F-160-407 Machine bolts , five sixteenths inch x one inch, with nuts and lockwashers
44 - F-160-409 Rd Hd machine screws, one quarter inch x three quarters inch with nuts and washers
45 - F-160-402 Rivets, three sixteenths inch x one inch
46 - F-160-413 Flat steel washers , one half inch , for spacers in idler control
47 - F-160-430 Gear guard
48 - F-160-412B Hex head capscrews, five sixteenths inch x one half inch with lock washer
49 - F-160-989A Seeding chart decal
50 - F-160-831 Herd Sure Feed Broadcaster decal, needs model number with it
51 - F-160-988 Model number decal for F160 Standard, use with 831 decal
52 - F-160-1091 Caution, spinning blades decal
