180 MANUAL BANDING KIT
Orchard Trailer, (Optional) Part #269 w/low profile wheels and flotation tires.
#180 Manual Controlled Banding Kit with dual
openings assures spreading even amounts on both sides.
Blocking plate for one-side application... left or right.
Adjustable from 60 inches to 34 feet, with no center
spread where not needed. (On wide spreads such as
34 ft., pattern width is approximately 6 ft., and on 60
inches pattern width is approximately 18 inches.)
OPTIONAL EQUIPMENT:
| • #82.............. |
Side-Pattern Kit (Manual Controlled) |
| • #838............ |
Hydraulic Controlled Side-Pattern Kit, (must have 1000 kit installed) |
| • #275............ |
Rear Discharge only Banding Kit, (Gearbox must be set at 1000 RPM ,
but run at 540 RPM) |
| • #276............ |
Left Side Only Banding Kit, (No modification needed) |
| • #225............ |
Hydraulic controlled Banding Kit, (user must select either the 1000 or the 232 kit to complete installation) |
| • #232............ |
Mounting kit to complete mounting of 225 hydraulic controlled banding kit when user does not want to purchase complete 1000 hydraulic kit. |
• #1000.......... |
Hydraulic Kit for remote control of seeder, (requires 8" stroke ASAE Hydraulic Cylinder) with 28-3/8" extended length. Cylinder not included. |
• 225 Manual... |
Similar to 225 Hydraulic controlled banding kit, except 225 Manual uses two separate manual levers. One controls right side, one controls left side of Banding Kit. No additional kits required for use. |
Herd Seeder Co., Inc.
2383 South U. S. 35, Logansport, IN 46947
Toll-free: 866-753-6311 Phone: 574-753-6311 Fax: 574-722-4106
www.herdseeder.com info@herdseeder.com
