225 MANUAL BANDING KIT

This unit has 2 control cables that operate independently with 2 separate levers. This allows the operator to spread material to both sides at the same time or to one side or the other. This is accomplished by control levers mounted beside the operator, as shown in picture below.  Also available, the Hydraulic Controlled 225 Banding Kit. This takes the work out of opening and closing...lets the cylinder do the work. Individual cables to each opening... disconnect one for one-sided spreading. Precision openings fine for spreading granular chemicals as insecticides and herbicides. Also available for 225 Banding Kit when mounted on 1200C, the 525 Dual Hydraulic Cylinders for INSTANT-ON... INSTANT-OFF control for right or left spreading. Both style Banding Kits are ideal for spreading fertilizer under fruit and nut trees, in vineyards, nurseries or any place where band spreading is desired. The chutes are adjustable from 60 inches to 34 feet, with no center spread where not needed. (On side spreads such as 34 ft., pattern width is approximately 6 ft., and on 60 inches, pattern width is approximately 18 inches.)

OPTIONAL EQUIPMENT: • 1200C w/Orchard Trailer,     #269 w/Low Profile Wheels & Flotation tires. • #82 - Side-Pattern Kit (Manual Controlled) • #838 - Hydraulic controlled side-pattern kit. (Must have 1000 kit installed) • #180 - Manual Controlled Banding Kit • #275 - Rear Discharge Only Banding Kit (Gearbox must be set at 1000 RPM but run at 540 RPM) • #276 - Left Side Only Banding Kit • #232 - Mounting Kit to complete mounting of 225 hydraulic controlled banding kit when user does not want to purchase complete 1000 hydraulic kit. • #1000 - Hydraulic Kit for remote control of seeder (Require 8" stroke ASAE Hydraulic Cylinder) with 28-3/8" extended length. Cylinder not included)

Herd Seeder Co., Inc.
2383 South U. S. 35, Logansport, IN  46947
Toll-free: 866-753-6311     Phone:  574-753-6311     Fax: 574-722-4106
www.herdseeder.com        info@herdseeder.com